1. FRP storage tank cannot be loaded on the top at will. It is forbidden to use the atmospheric storage tank under negative pressure!

2. Do not apply load on the connecting pipe. Effective vibration avoidance measures shall be set for the connecting pipe with vibration source.

3. Do not get close to the fire or away from the heat source.

4. The large working pressure of Pressure FRP storage tank (FRP container and FRP tower) is not allowed to exceed the design specified value. Unless specially designed, the cold and hot pipes of its vibration source (mixing and recoil device) shall be isolated and supported from the tank.

5. Atmospheric FRP storage tank refers to the hydrostatic tank connected with the atmosphere, especially the vertical flat bottom tank. It shall ensure that the tank body and the atmosphere are unobstructed and good, and there will be no pressure (positive and negative pressure) due to venting, feeding or temperature change.

6. It is only used under the premise of design. The FRP storage tank cannot change the use medium (including medium concentration), temperature, use pressure, etc. at will.